J4S Steel & Stainless Wire Butt Welder
Stainless Steel, Steel, Titanium
View Product
Butt Welder
J3S Steel & Stainless Wire Butt Welder
Transform your welding operations with the JS Series Micro Weld Butt Welders — engineered for durability, performance, and consistent, high-quality welds on solid steel, stainless, and titanium wire and rod up to .5 in (12,7 mm) across the range. The J3S is the finest-capacity model in the five-model line, welding solid steel from .020 in (0,50 mm) to .080 in (2,03 mm). An extra heavy-duty transformer supports continuous processing, while solid-state 99-step SCR heat control delivers the fine, repeatable heat stainless and titanium required. Foot-actuated dual-action clamping and upset keep both hands free, and selectable 120V, 240V, or 480V power simplifies installation.
Metal:
Stainless Steel, Steel, Titanium
Construction:
Solid
Solid Steel Welding Range:
.020 in (0,50 mm) - .080 in (2,03 mm)
Max Current Draw:
28/14/7/5
Single Phase Transformer:
Yes
Heat Selection Method:
99 STEPS SCR
Upset Method:
Mechanical
Air Requirements:
n/a
Mounting Truck Type:
4 Wheels
Dimensions & Weight:
Welding Die Height: 41 in (104 cm)
Width Across the Front: 24 in (61 cm)
Depth to the Back: 24 in (61 cm)
Height: 53 in (136 cm)
Weight: 180 lbs (82 kg)
Width Across the Front: 24 in (61 cm)
Depth to the Back: 24 in (61 cm)
Height: 53 in (136 cm)
Weight: 180 lbs (82 kg)
- Work Lamp With Bracket
- Filing Vise With Bracket
- Complete Front Anneal
- Standard Top Anneal
- ETS-Type Hand Shear
- 600 Volts – 60 Hertz Service
- Dial Indicator For Front Anneal
- 1/3 HP Grinder
Butt Welder Upgrades to Improve Your Precision and Productivity
Upgrade your Micro Weld butt welders with world-class safety & technology accessories. You’ll get the same quality, rugged welders with the safety features you need, creating uniformity with every machine and consistency with every training.
- New Finger Safe Covers & Components
- 24V Control Circuit
- Interlock Switch on Rear Access Panel
- Solid-State Heat Control
Applications
Joining the lightest solid steel, stainless, or titanium wire and rod ahead of drawing, forming, or coiling
Continuous-line splicing in spring, fastener, wire-form, fencing, and reinforcing-mesh production
Rejoining stock on payoff and take-up lines to keep a running line fed
Stainless and titanium wire and rod joining where a clean, full-strength butt weld is required
Real-World Benefits
- Extra heavy-duty transformer supports continuous processing of steel wire and rod without duty-cycle stalls.
- Solid-state 99-step SCR heat control delivers fine, repeatable heat selection — important for consistent results on stainless and titanium.
- Foot-actuated, dual-action clamping and upset keep both hands free for wire handling and give a consistent, operator-independent upset.
- Selectable 120V, 240V, or 480V single-phase power makes the machine easy to drop into most shop services.
- Mobile 4-wheel truck lets the station move to the line; anneal, vise, shear, and grinder options handle prep, weld, and finish.
Comparison to Similar Models
“S” models are the ferrous line — the JS Series — welding solid steel, stainless, and titanium wire and rod up to .5 in across the full range. This is the counterpart to the non-ferrous JC line (copper/aluminum) and the flat-stock JSF line, all built on the same J chassis with the same foot-actuated upset and SCR heat control.
The J3S is the smallest-capacity JS model, welding solid steel from .020 in to .080 in (0.50–2.03 mm) — the finest steel range in the line. Step up to the J4S (.040–.160 in), J5S (.060–.250 in), or J6S (.187–.375 in) as your stock grows. For non-ferrous wire choose the JC line; for flat strip choose the JSF line.
Best For
Shops running the lightest solid steel, stainless, or titanium wire (.020–.080 in) — fine springs, wire forms, and fasteners — that want the smallest, most economical, easy-to-handle JS-Series welder.